Alphacool Radiators

Description: For more than a decade, Alphacool has dominated the market with the Nex Xxo S Full Copper radiator series. Our extensive portfolio of radiator variants is unique in the world. Just like our manufacturing process, which allows us to produce all water-carrying parts and the cooling fins out of pure copper. As a result, the Nex Xxo S series offers the highest thermal conductivity of any radiator on the market. Thanks to their exceptional performance, the radiators can easily dissipate even extremely high waste heat and have become essential in many areas of the cooling industry. The next step in evolution: Nex Xxo S HPE Full Copper Radiator! The Nex Xxos Full Copper HPE Radiator uses the same materials as previous Nex Xxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests* with the conventional Nex Xxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal Nex Xxo S radiators even increases progressively, reaching a possible performance increase of up to 6K. (* Test setup: Nex Xxos ST30 360mm radiator vs. Nex Xxos HPE-30 360mm radiator with Eisbaer cooler and 3x 120mm Rise Aurora fans and on Asus Prime x299 motherboard with Intel i9 10900x CPU with 350W waste heat) Connection options & mounting The Nex Xxo S HPE radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or drain port, which can be used for filling and draining the water circuit. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required. Safety first The Nex Xxo S HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage. Patented screw plugs All Nex Xxo S HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often mean that the radiator cannot be laid flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface and allow easy installation in the case. Alphacool NexXxoS HPE-45 Full Copper 360mm Radiator - shop the best deal online on appliances4.me

Category: Radiators

Delivery cost: GB::Royal Mail Tracked 24:4.99 GBP

MPN: 14440

GTIN: 4250197144407

Description: Alphacool is an internationally renowned company in the field of water cooling solutions for both industrial and home users. To ensure that customers receive the best products available, Alphacool is constantly developing new products and making improvements to existing products. Make No Compromises, Use Copper. As usual, Alphacool uses pure copper for the Nex Xxo S ST25 slim radiators. The end chambers, the water channels and the cooling fins are all made of copper, a unique selling point worldwide. No other manufacturer relies on pure copper for all these components combined. As a result, Alphacool has been producing one of the most popular and highest performing radiators on the market for many years, providing the perfect foundation for every water cooling system. Full Cooling Capacity To maximize the performance of a radiator, Alphacool reaches deep into its bag of tricks. Copper is the starting point. With a thermal conductivity of 400 W/(m K) for copper compared to 236 W/(m K) for aluminium, the winner is clear. Alongside this is the special fin density. Alphacool is one of the oldest companies in the field of water cooling and has carried out countless laboratory tests. The result is a fin spacing of 15 FPI. This means that the air flow is only slightly obstructed as the air can pass through even without high pressure. However, the cooling capacity does not suffer from this, on the contrary. To use the airflow optimally, all cooling fins have small serrations. These are tiny flaps that guide the airflow in the desired direction and increase the surface area. In the case of radiators, they are barely 1 mm high, but still provide controlled air turbulence to increase cooling capacity and minimise airflow noise. Compact The ST25 slim radiators offer the ideal liquid cooling solution for Mini-P Cs or SSF (Small Form Factor) systems. Due to the extremely flat design, the Nex Xxo S ST25 radiators are ideal for such small cases and due to the reduced size, they give you the extra space you need to work in the case. Technical data: Lx Wx H: 272 x 120 x 25,5 mm Material: copper Material outer housing: steel Fins per Inch: 15 Threads: 2 x G1/4“ Thread size fan mounting: M3 Fan size: 120 mm Fan slots: 2 single sided /4 double sided Note on application Please use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well. Alphacool NexXxoS ST25 Full Copper 240mm Radiator - shop the best deal online on appliances4.me

Category: Radiators

Delivery cost: GB::Royal Mail Tracked 24:4.99 GBP

MPN: 14353

GTIN: 4250197143530

Description: The new Alphacool Nex Xxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market. Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool Nex Xxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool Nex Xxos is the one tool for all your needs! Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years. Following this tradition, the new Nex Xxos radiators are the first to truly deserve the “ Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop. Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length. Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the Nex Xos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and Nex Xxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport. Versatility is the essence of the new Nex Xxos series! The radiators are available in different versions to be used with 120mm, 140mm or 180mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price. Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the Nex Xxos series is equipped with an internal protective ledge which stops the screw before it damages the fins. Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted. These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions. Alphacool Nex Xxos radiators: The one tool for all your cooling needs! Technical specifications: Material internal: Mostly copper Material casing: Side panels steel, threads brass, copper chambers Colour: Black Dimensions (Lx Wx H): 324 x 144 x 60mm Radiator size: 2x 140mm Connection threads: 6x 1/4“ Outlet Connection threads: 1x 1/4“ Mounting thread size: M3 Pressure tested: 1.5bar Extent of delivery: 1x Radiator 5x screw plug 8x M3x 30mm hexagon socket screw 8x M3x 35mm hexagon socket screw. Alphacool NexXxoS UT60 Full Copper 280mm Radiator - shop the best deal online on appliances4.me

Category: Radiators

Delivery cost: GB::Free Delivery:0.00 GBP

MPN: 14177

GTIN: 4250197141772

Description: The new Alphacool Nex Xxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market. Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool Nex Xxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool Nex Xxos is the one tool for all your needs! The new Alphacool Nex Xxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market. Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool Nex Xxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool Nex Xxos is the one tool for all your needs! Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years. Following this tradition, the new Nex Xxos radiators are the first to truly deserve the “ Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop. Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length. Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the Nex Xos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and Nex Xxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport. Versatility is the essence of the new Nex Xxos series! The radiators are available in different versions to be used with 120mm, 140mm or 180mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price. Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the Nex Xxos series is equipped with an internal protective ledge which stops the screw before it damages the fins. Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted. These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions. Alphacool Nex Xxos radiators: The one tool for all your cooling needs! Technical specifications: Material internal: Mostly copper Material casing: Side panels steel, threads brass, copper chambers Colour: Black Dimensions (Lx Wx H): 157x 124x 46mm Radiator size: 1x 120mm Connection threads: 6x 1/4“ Mounting thread size: M3 Pressure tested: 1.5bar Weight: 784g. Alphacool NexXxoS XT45 Full Copper 120mm Radiator - shop the best deal online on appliances4.me

Category: Radiators

Delivery cost: GB::Royal Mail Tracked 24:4.99 GBP

MPN: 14163

GTIN: 4250197141635

Description: The new Alphacool Nex Xxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market. This Radiator can discharge up to 1600 W at an ambient temperature of 30°C and fans with 4000 rpm. Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool Nex Xxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool Nex Xxos is the one tool for all your needs! Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years. Following this tradition, the new Nex Xxos radiators are the first to truly deserve the “ Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop. Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length. Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the Nex Xos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and Nex Xxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport. Versatility is the essence of the new Nex Xxos series! The radiators are available in different versions to be used with 120mm, 140mm or 180mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price. Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the Nex Xxos series is equipped with an internal protective ledge which stops the screw before it damages the fins. Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted. These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions. Alphacool Nex Xxos radiators: The one tool for all your cooling needs!. Alphacool NexXxoS UT60 Full Copper 360mm Radiator - shop the best deal online on appliances4.me

Category: Radiators

Delivery cost: GB::Royal Mail Tracked 24:4.99 GBP

MPN: 14174

GTIN: 4250197141741

Description: Make No Compromises, Use Copper. As usual, Alphacool also uses pure copper for the Nex Xxo S 200 mm XT45 Radiator. The end chambers, water channels and cooling fins are all made of copper and are a unique selling point worldwide. As a result, Alphacool radiators have been among the most popular and best on the market for many years, providing the perfect foundation for every water cooling system. Full cooling performance To maximize the performance of a radiator, Alphacool reaches deep into its bag of tricks. Copper is the starting point. With a thermal conductivity of 400 W/(m K) for copper compared to 236 W/(m K) for aluminium, the winner is clear. Alongside this is the special fin density. Alphacool is one of the oldest companies in the field of water cooling and has carried out countless laboratory tests. The result, especially for such large radiators, is a fin spacing of 12 FPI. This means that the air flow is almost unobstructed as the air can pass through even without high pressure. However, the cooling capacity does not suffer from this, on the contrary. To use the airflow optimally, all cooling fins have small serrations. These are tiny flaps that guide the airflow in the desired direction and increase the surface area. In the case of radiators, they are barely 1 mm high, but still provide controlled air turbulence to increase cooling capacity and minimise airflow noise. Which fans? The 200 mm XT45 radiator offers space for a 200 mm fan with 154 or 165 mm mounting holes on the mounting frame. The fans are screwed onto a mounting frame which can also be removed for purely passive operation in order not to obstruct the natural airflow. Connection options The Alphacool Nex Xxo S 200 mm XT45 radiator offers four G1/4" threads for IN and OUT. A further G1/4" thread on the back of the radiator serves as a fill port. Alternatively, a temperature sensor or a drain port can also be attached here. Small was yesterday. With a cooling surface of 20 x 20 cm the 200 mm XT Radiator offers more than enough cooling power to cool every CPU and every graphics card. Technical data: L x W x H: 238 x 199 x 48 mm Net weight: 1040 g Material cooling fins: copper Material cooling channels: copper Prechamber material: copper Material outer housing: steel Fins per Inch: 12 Threads: 7 x G1/4“ Thread size fan mounting: M3 Fan size: 200 mm Fan slots: 1 Pressure tested: 0,8 bar Certificates: CE, FC, Ro HS. Alphacool NexXxoS XT45 Full Copper 200mm Radiator - shop the best deal online on appliances4.me

Category: Radiators

Delivery cost: GB::Royal Mail Tracked 24:4.99 GBP

MPN: 14348

GTIN: 4250197143486

Description: Alphacool is an internationally renowned company in the field of water cooling solutions for both industrial and home users. To ensure that customers receive the best products available, Alphacool is constantly developing new products and making improvements to existing products. Make No Compromises, Use Copper. As usual, Alphacool uses pure copper for the Nex Xxo S ST25 slim radiators. The end chambers, the water channels and the cooling fins are all made of copper, a unique selling point worldwide. No other manufacturer relies on pure copper for all these components combined. As a result, Alphacool has been producing one of the most popular and highest performing radiators on the market for many years, providing the perfect foundation for every water cooling system. Full Cooling Capacity To maximize the performance of a radiator, Alphacool reaches deep into its bag of tricks. Copper is the starting point. With a thermal conductivity of 400 W/(m K) for copper compared to 236 W/(m K) for aluminium, the winner is clear. Alongside this is the special fin density. Alphacool is one of the oldest companies in the field of water cooling and has carried out countless laboratory tests. The result is a fin spacing of 15 FPI. This means that the air flow is only slightly obstructed as the air can pass through even without high pressure. However, the cooling capacity does not suffer from this, on the contrary. To use the airflow optimally, all cooling fins have small serrations. These are tiny flaps that guide the airflow in the desired direction and increase the surface area. In the case of radiators, they are barely 1 mm high, but still provide controlled air turbulence to increase cooling capacity and minimise airflow noise. Compact The ST25 slim radiators offer the ideal liquid cooling solution for Mini-P Cs or SSF (Small Form Factor) systems. Due to the extremely flat design, the Nex Xxo S ST25 radiators are ideal for such small cases and due to the reduced size, they give you the extra space you need to work in the case. Technical data: Lx Wx H: 393 x 120 x 25,5 mm Material: copper Material outer housing: steel Fins per Inch: 15 Threads: 2 x G1/4“ Thread size fan mounting: M3 Fan size: 120 mm Fan slots: 3 single sided /6 double sided Note on application Please use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well. Alphacool NexXxoS ST25 Full Copper 360mm Radiator - shop the best deal online on appliances4.me

Category: Radiators

Delivery cost: GB::Royal Mail Tracked 24:4.99 GBP

MPN: 14354

GTIN: 4250197143547

Description: For more than a decade, Alphacool has dominated the market with the Nex Xxo S Full Copper radiator series. Our extensive portfolio of radiator variants is unique in the world. Just like our manufacturing process, which allows us to produce all water-carrying parts and the cooling fins out of pure copper. As a result, the Nex Xxo S series offers the highest thermal conductivity of any radiator on the market. Thanks to their exceptional performance, the radiators can easily dissipate even extremely high waste heat and have become essential in many areas of the cooling industry. The next step in evolution: Nex Xxo S HPE Full Copper Radiator! The Nex Xxos Full Copper HPE Radiator uses the same materials as previous Nex Xxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests with the conventional Nex Xxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal Nex Xxo S radiators even increases progressively, reaching a possible performance increase of up to 6K. Space-saving & flexible to use The compact slim radiators can be mounted very flexibly in even the tightest cases thanks to their low overall height of only 20mm. Connection options & mounting The Nex Xxo S HPE radiator has one IN and OUT connection with G1/4" threads in the pre-chamber area. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required. Technical data radiator L x W x H 270 x 120 x 20mm Material cooling fins, pre-chambers & channels copper Material threads brass Material outer housing stainless steel Threads 2x G1/4" IN/OUT (max. 5mm thread length) Possible fan size 120mm Possible fan assembly 2x one-sided /4x both-sided Thread size fan mounting M3 Pressure tested 0,8 Bar Maximum working temperature 60°C Fin density 19 FPI Weight 454g Color black Note on application Please use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well. Alphacool NexXxoS ST20 HPE Full Copper 240mm Radiator - shop the best deal online on appliances4.me

Category: Radiators

Delivery cost: GB::Royal Mail Tracked 24:4.99 GBP

MPN: 14436

GTIN: 4250197144360

Description: For more than a decade, Alphacool has dominated the market with the Nex Xxo S Full Copper radiator series. Our extensive portfolio of radiator variants is unique in the world. Just like our manufacturing process, which allows us to produce all water-carrying parts and the cooling fins out of pure copper. As a result, the Nex Xxo S series offers the highest thermal conductivity of any radiator on the market. Thanks to their exceptional performance, the radiators can easily dissipate even extremely high waste heat and have become essential in many areas of the cooling industry. The next step in evolution: Nex Xxo S HPE Full Copper Radiator! The Nex Xxos Full Copper HPE Radiator uses the same materials as previous Nex Xxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests with the conventional Nex Xxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal Nex Xxo S radiators even increases progressively, reaching a possible performance increase of up to 6K. Space-saving & flexible to use The compact slim radiators can be mounted very flexibly in even the tightest cases thanks to their low overall height of only 20mm. Connection options & mounting The Nex Xxo S HPE radiator has one IN and OUT connection with G1/4" threads in the pre-chamber area. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required. Technical data L x W x H 390 x 120 x 20mm Material cooling fins, pre-chambers & channels copper Material threads brass Material outer housing stainless steel Threads 2x G1/4" IN/OUT (max. 5mm thread length) Possible fan size 120mm Possible fan assembly 3x one-sided /6x both-sided Thread size fan mounting M3 Pressure tested 0,8 Bar Maximum working temperature 60°C Fin density 19 FPI Weight 610g Color black Note on application Please use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well. Alphacool NexXxoS ST20 HPE Full Copper 360mm Radiator - shop the best deal online on appliances4.me

Category: Radiators

Delivery cost: GB::Royal Mail Tracked 24:4.99 GBP

MPN: 14437

GTIN: 4250197144377