DrayTek VigorAP 903 Mesh Wireless Range Extender and Access Point
TO EXPLORE MORE
Price: £154.44
Brand: Draytek
Description: Vigor AP 903 is a high-performance Mesh Wireless solution, designed to expand the wireless coverage, eliminate Wi-Fi dead zones and significantly reduce the cost of network deployments. It can also be used as a traditional access point either managed or stand alone so has the flexibility to be used how you need it. The Vigor AP 903 is a dual-band 802.11ac Wave 2 Mesh Wireless solution, designed to eliminate wireless drop outs, stuttering videos, slow download speeds, poor signal and Wi-Fi dead zones. One access point acts as the controller (Mesh root) and in total up to 8 access points create an easy to manage wireless mesh. Extend coverage without running expensive cabling. Initial setup of the Vigor AP 903 is easy with the Dray Tek Wireless app, whether it's creating a new Mesh network or being set up in AP and Range Extender modes, the Quick Start Wizard assists throughout. Manage the Vigor AP 903 centrally through the Vigor ACS central management platform, Vigor Connect, Router AP Management, or simply on its own as a stand-alone access point. The Vigor AP 903 has the flexibility to be used how you need it. Mesh Wireless Mesh Wireless links Vigor AP access points across both Wi-Fi and Wired links to cover a large area with a single Wireless network, spanning multiple Wireless Access Points and easily managed from the Mesh Root Vigor AP or with the Dray Tek Wireless app. The Mesh Root Vigor AP links up to your existing Internet router, such as the Dray Tek Vigor 2862 and additional Vigor A Ps join up as Mesh Nodes, which connect wirelessly to the Mesh Root. Your devices see a single Wi-Fi network (SSID) and connect to the nearest Vigor AP in the Mesh, instead of a distant Wi-Fi network with low signal. Internet connectivity relays through the Mesh, using the up to 866 Mbps 5G Hz wireless as the backhaul link, to relay between Mesh Nodes and avoid long waits for downloads. Easy Setup with the Dray Tek Wireless app Dray Tek's Wireless app assists you with setting up Vigor AP 903 access points and a Mesh Wireless network. Once installed on your Smartphone or Tablet, use the Quick Start Wizard to set your Vigor A Ps to operate as a Mesh Wireless network. Set up a single Vigor AP 903 as a stand-alone Access Point, or extend an existing wireless network as a Range Extender. Simply scan the access point’s QR code to detect it, or manually input the Vigor A Ps default SSID & password, then configure your wireless network with step-by-step guidance. When it’s all set up, view the Mesh Wireless status and connected wireless clients from the app. Power-over-Ethernet The Vigor AP 903 has built-in Po E (Standard IEEE 802.3af Power over Ethernet) as standard. Connect the Vigor AP to a Po E-enabled Ethernet switch or Po E injector to power it without local power to the unit (power supply) - the Vigor AP 903 will take its power from the Ethernet cable. The Vigor AP 903 supports Gigabit Po E (if you have a Gigabit Po E switch/injector) such as our Vigor Switch P1280 or P1092 models (or any other 802.3af/at device). Po E is ideal for situations where you do not have mains power available in the exact location where you want to install the Vigor AP 903 or just for general aesthetic neatness, perhaps where the AP is installed somewhere prominent. The Dray Tek Vigor AP 903 is also supplied with an AC/DC mains PSU for installations where you are not using Po E.5 Gigabit Ethernet Ports The Vigor AP 903 has five wired Ethernet ports. As the ports are all Gigabit, you can be sure that the AP is fed at the maximum speed in order to fully satisfy the full speed of both 2.4G Hz and 5 Ghz bands simultaneously. In Mesh and Range Extender modes, the Vigor AP 903 bridges its wireless uplink to the LAN ports, providing fast connectivity to each additional device connected, without the need for an additional network switch or a long cable run. LAN Port A1 is also used as the Po E input if you're powering the AP by Po E. Dual Band 11ac Wave 2 Access Point The Vigor AP 903 is an 802.11ac Wave 2 access point, improving performance by increasing the amount of data that can be sent at one time. 11ac Wave 2 includes Multi User MIMO (Multiple In, Multiple Out) or MU-MIMO technology, further building upon the MIMO technologies introduced with 802.11n. The Vigor AP's MU-MIMO technology when used with MU-MIMO capable wireless clients, allows each antenna (or Spatial Stream) to send to separate wireless clients, potentially doubling the data transmission rate to clients. Significant limitations of wireless throughput are the frequency space and radio time, shared between all users. A typical wireless access point can send data to only one client at a time with its radio. With enough users connected, congestion slows down transfer speeds more & more, as the AP divides its time between each client. Multi User MIMO allows the Vigor AP to send data out to more than one wireless client at a time, splitting bandwidth between the Vigor AP's Spatial Streams instead of the access point's. Draytek DrayTek VigorAP 903 Mesh Wireless Range Extender and Access Point - shop the best deal online on appliances4.me
Category: Wireless and Networking
Merchant: CCL
Product ID: NET4271
Delivery cost: GB::Free Delivery:0.00 GBP
MPN: VAP903-K
GTIN: 4712909127158
My website utilises affiliate links when you click my 'Get the best deal now' buttons. If you buy something through one of these links, I may earn a little commission, at no extra cost to you.
I have relationships with many of the top online retailers (purchasing, shipping and returns will be handled directly by them) which enables me to offer the best deal online for the DrayTek VigorAP 903 Mesh Wireless Range Extender and Access Point and many other similar products - which will appear below, to enhance your online shopping experience.
For even more great deals on Draytek Wireless and Networking, click the link.
