TP-Link MC210CS network media converter 1000 Mbit/s 1310 nm Single-mode Black
60 ratings
Zoom
×
SCROLL DOWN TO EXPLORE MORE
Price: £32.10
Brand: TP-Link
Description: - Complies with IEEE 802.3ab and IEEE 802.3z. - Provides switch configuration of Force /Auto transfer mode for FX port. - Extends fiber distance up to 15km The MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000 Base-T copper media or vice versa. Designed under IEEE802.3ab 1000 Base-T and IEEE802.3z 1000 Base-LX/LH standards the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LIN Ks 19 system chassis Auto MDI/MDI-X for TX port and front panel status LE Ds. The MC210CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 15 kilometers. TP-Link MC210CS network media converter 1000 Mbit/s 1310 nm Single-mode Black - shop the best deal online on appliances4.me
My website utilises affiliate links when you click my 'Get the best deal now' buttons. If you buy something through one of these links, I may earn a little commission, at no extra cost to you.
I have relationships with many of the top online retailers (purchasing, shipping and returns will be handled directly by them) which enables me to offer the best deal online for the TP-Link MC210CS network media converter 1000 Mbit/s 1310 nm Single-mode Black and many other similar products - which will appear below, to enhance your online shopping experience.
Review: The converter works great and as described 1000Mbps only ! Therefore take care if you have to connect a non gigabit peripheral behind you'll need to use a 10/100/1000Mbps switch or router in between.
Description: < Strong Style=" Font-Size: 14 Px;"> Highlights: < Div> Complies With 802.3U 10/100 Base-Tx 100 Base-Fx Standards.</Div> < Div> Link Fault Passthrough And Far End Fault Minimize The Loss Caused By Link Failure Timely</Div> < Div> Provides Switch Configuration Of Half-Duplex /Full-Duplex Transfer Mode For Fx Port.</Div> < Div> Extends Fiber Distance Up To 20 Km</Div> < Div> </Div> < Div> </Div> < Div> What This Product Does</Div> < Div> The Mc 110cs Is A Media Converter Designed To Convert 100 Base-Fx Fiber To 100 Base-Tx Copper Media Or Vice Versa. Designed Under Ieee 802.3U 10/100 Base-Tx And 100 Base-Fx Standards The Mc 110cs Is Designed For Use With Single-Mode Fiber Cable Utilizing The Sc-Type Connector. The Mc 110cs Supports Longwave (Lx) Laser Specification At A Full Wire Speed Forwarding Rate. It Works At 1310 Nm On Both Transmitting And Receiving Data. </Div> < Div> </Div> < Div> Other Features Of This Module Include The Ability To Be Used As A Stand Alone Device (No Chassis Required) Or With Tp-Link& Acute;S 19& Acute;& Acute; System Chassis Auto Mdi/Mdi-X For Tx Port Auto Negotiation Of Duplex Mode On Tx Port And Front Panel Status Leds. The Mc 110cs Will Transmit At Extended Fiber Optic Distances Utilizing Single-Mode Fiber Up To 20 Kilometers.</Div>. TP-Link MC110CS network media converter 100 Mbit/s 1310 nm Single-mode Black - shop the best deal online on appliances4.me
Description: Fast Ethernet to Fiber Desktop Media Converter with USB power This desktop media converter features 100TX to 100FX conversion with multi-mode LC fiber connector supporting a distances from 220m to 550m. At just 1.25 inches wide 3.6 inches deep 0.85 inches high this media converter can easily fit into the palm of a hand. Allied Telesis AT-DMC100/LC-50 network media converter 100 Mbit/s 1310 nm Multi-mode Grey - shop the best deal online on appliances4.me
Description: PLANET FT-80x is a Fast Ethernet Bridge 100 Base-FX fiber to 10/100 Base-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex the converter adapts to the full-duplex mode and provides an effective 200 Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex the converter adapts to the half-duplex mode and provides the nominal 100 Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of converter operates at 1310 nm and uses ST SC MT-RJ VF-45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/35/50km are available. The FT-80x series is with LFP (Link Fault Pass through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides disable or enable the LFP function. LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. Cablenet PLANET FT802S15 network media converter 100 Mbit/s 1310 nm Single-mode Black - shop the best deal online on appliances4.me
Description: PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex the converter adapts to the full-duplex mode and provides an effective 200 Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex the converter adapts to the half-duplex mode and provides the nominal 100 Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST SC MTRJ VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available. Media and provide efficient solution to monitoring the net. The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. Assmann PLANET FT-802 network media converter 100 Mbit/s 1310 nm Multi-mode Single-mode Black - shop the best deal online on appliances4.me
Description: - Complies with IEEE 802.3ab and IEEE 802.3z. - FX port supports hot-swappable. - Extends fiber distance up to 0.55km for multi-mode fiber and 10km for single-mode fiber The MC220L is a media converter designed to convert 1000BASE-SX/LX/LH fiber to 1000 Base-T copper media or vice versa. Designed under IEEE802.3ab 1000 Base-T and IEEE802.3z 1000 Base-SX/LX/LH standards the MC220L is designed for use with multi-mode/single-mode fiber cable utilizing the SC-Type connector. The MC220L supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data when adopting multi-mode fiber and 1310nm on both transmitting and receiving data when adopting single-mode. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LIN Ks 19system chassis Auto MDI/MDI-X for TX port and front panel status LE Ds. The MC220L will transmit at extended fiber optic distances utilizing multi-mode fiber up to 0.55 kilometers and 10 kilometers when utilizing single-mode fiber. TP-Link MC220L network media converter 1000 Mbit/s Multi-mode Single-mode Black - shop the best deal online on appliances4.me
Description: - Complies with 802.3u 10/100 Base-TX 100 Base-FX standards. - Provides switch configuration of Half-Duplex /Full-Duplex transfer mode for FX port. - Extends fiber distance up to 2km The MC100CM is a media converter designed to convert 100BASE-FX fiber to 100 Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100 Base-TX and 100 Base-FX standards the MC100CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC100CM supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required)or with TP-LIN Ks 19 system chassis Auto MDI/MDI-X for TX port Auto negotiation of duplex mode on TX port and front panel status LE Ds. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 2 kilometers. TP-Link MC100CM network media converter 100 Mbit/s 1310 nm Multi-mode Black - shop the best deal online on appliances4.me
Description: PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex the converter adapts to the full-duplex mode and provides an effective 200 Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex the converter adapts to the half-duplex mode and provides the nominal 100 Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST SC MTRJ VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available. Media and provide efficient solution to monitoring the net. The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function. LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. Cablenet PLANET FT801UK network media converter 100 Mbit/s 1310 nm Multi-mode Black - shop the best deal online on appliances4.me
Description: Our media converters allow you to connect disparate cable types in your network. Media conversion offers you the ability to: Extend network distances by adding fiber only where it is needed Add new devices without replacing costly cable Keep pace with changing technology Integrate high-bandwidth devices into the network Full 15.4W POE support. Allied Telesis AT-PC232/POE network media converter 100 Mbit/s 1310 nm - shop the best deal online on appliances4.me
Description: The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot linking the port with the network (Figure 1). SF Ps can be used and interchanged on a wide variety of Cisco products and can be intermixed in combinations of 1000BASE-SX 1000BASE-LX/LH 1000BASE-ZX or 1000BASE-BX10-D/U on a port-by-port basis.1000BASE-LX/LH SFP for Both Multimode and Single-Mode Fibers. The 100BASE-LX/LH SFP compatible with the IEEE 802.3z 1000BASE-LX standard operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers. Cisco 1000BASE-LX/LH network transceiver module 1000 Mbit/s 1310 nm - shop the best deal online on appliances4.me
Description: This Desktop Media Converter Features 1000T To 1000 Sx Conversion With Sc Multi-Mode Fiber Connector Supporting A Distances From 220M To 550M. At Just 1.25 Inches Wide 3.6 Inches Deep 0.85 Inches High This Media Converter Can Easily Fit Into The Palm Of A Hand. Allied Telesis AT-DMC1000/SC-30 network media converter 1000 Mbit/s 850 nm Multi-mode Grey - shop the best deal online on appliances4.me
