Ek Water Blocks Ek-Torque Angled 90 Rotary Fitting - Black

Description: EK-Quantum Torque Micro Rotary adapter fittings allow you to make a simple 90° turn in the smallest possible footprint and installation height. With an overall installed height of just 21mm, Torque Micro Rotaries can squeeze into the most difficult places where it would be otherwise impossible to make a bend. This means it is 10mm lower in height than the standard 90° EK-Quantum Torque Rotary angled fitting. This Quantum Line adapter fitting is CNC-machined from a solid brass bar and protected with Nickel plating. The two parts of the fitting are permanently assembled and sealed with high-quality rubber O-rings. Since there is no space for conventional knurling, the base of the fitting extends through an opening in the top face where a 6mm Allen key has to be used to secure it in place. Once secured, the body of the fitting is free to rotate in either direction. EK recommends the use of the EK-Loop Multi Allen Key for this application. A male G1/4” thread is screwed into the desired port, and a fully rotatable joint allows the female G1/4” port to be directed in any perpendicular direction. You can install components in very close proximity thanks to this. The centreline of the female G1/4" port is 12.5mm above the mounting surface, the EK-Quantum Torque Micro Rotary 90 rotary angled adapter is compatible with any STC or HDC EK-Quantum Torque fitting and EK-Quantum Torque Micro HDP fittings. The width and overall diameter of the base is 16.5mm. Technical specification: Material: Brass Finish: Nickel Threads: G1/4" BSP; 4,5mm male thread length G1/4" BSP, 5mm female thread length The outer diameter: 16.5mm Installed height: 20,75mm Sealed with high-quality o-ring Made in Europe!. EK WaterBlocks EK Water Blocks EK-Quantum Torque Micro Rotary 90 degree in Nickel - shop the best deal online on appliances4.me

Category: Appliances and accessories

Delivery cost: GB::Royal Mail Tracked:1.99 GBP

MPN: 3831109849668

GTIN: 3831109849668

Description: EK-Quantum Torque Micro Rotary adapter fittings allow you to make a simple 90° turn in the smallest possible footprint and installation height. With an overall installed height of just 21mm, Torque Micro Rotaries can squeeze into the most difficult places where it would be otherwise impossible to make a bend. This means it is 10mm lower in height than the standard 90° EK-Quantum Torque Rotary angled fitting. This Quantum Line adapter fitting is CNC-machined from a solid brass bar and protected with Nickel plating, followed by plating with genuine gold. The two parts of the fitting are permanently assembled and sealed with high-quality rubber O-rings. Since there is no space for conventional knurling, the base of the fitting extends through an opening in the top face where a 6mm Allen key has to be used to secure it in place. Once secured, the body of the fitting is free to rotate in either direction. EK recommends the use of the EK-Loop Multi Allen Key for this application. A male G1/4” thread is screwed into the desired port, and a fully rotatable joint allows the female G1/4” port to be directed in any perpendicular direction. You can install components in very close proximity thanks to this. The centreline of the female G1/4" port is 12.5mm above the mounting surface, the EK-Quantum Torque Micro Rotary 90 rotary angled adapter is compatible with any STC or HDC EK-Quantum Torque fitting and EK-Quantum Torque Micro HDP fittings. The width and overall diameter of the base is 16.5mm. Technical specification: Material: Brass Finish: Gold Threads: G1/4" BSP; 4,5mm male thread length G1/4" BSP, 5mm female thread length The outer diameter: 16.5mm Installed height: 20,75mm Sealed with high-quality o-ring Made in Europe!. EK WaterBlocks EK Water Blocks EK-Quantum Torque Micro Rotary 90 Degree in Gold - shop the best deal online on appliances4.me

Category: Appliances and accessories

Delivery cost: GB::Royal Mail Tracked:1.99 GBP

MPN: 3831109851043

GTIN: 3831109851043

Description: EK-Quantum Torque Rotary (Adapter Fitting) is a revolvable angled (90°) adapter fitting with G1/4" threads. In the form of a cylinder, it is very sturdy and there are zero movements in the revolvable joint. This Quantum Line adapter is made out of CNC-machined brass and features a high-quality nickel plating followed by a second plating of real gold! The seal is made with quality EPDM O-rings. It is an extremely secure and sturdy piece that will last for many future builds. The adapter allows for connection of fitting with G1/4" threads to extend tubing possibilities in your water-cooled system allowing for easier bends and better accessibility. EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The Torque family of fittings offers a secure and modular system of connections between liquid cooling components and tubing within a PC. Quantum Torque series products cover angled adapters, rotary and static extenders, splitters, G1/4" plugs, drain valves, fittings, and much more. Technical specifications: Material: Brass Finish: Gold Threads: G1/4" BSP; 4,5mm male thread length G1/4" BSP; 6mm female thread length The outer diameter: 23mm Installed height: 31,5mm Sealed with high-quality NBR o-ring PLEASE NOTE: This product should NOT be installed with any aluminum Fluid Gaming parts!. EK WaterBlocks EK Water Blocks EK-Quantum Torque Rotary 90 Degree in Gold - shop the best deal online on appliances4.me

Category: Appliances and accessories

Delivery cost: GB::Royal Mail Tracked:1.99 GBP

MPN: 3831109849828

GTIN: 3831109849828

Description: EK-Quantum Torque Splitter 3F T - Black is a simple cylinder-shaped adapter fitting with 3 (three) G1/4" Female threads. This product is useful for splitting or combining the liquid flow in your loop. Made from CNC machined brass with a satin black finish. EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The Torque family of fittings offers a secure and modular system of connections between liquid cooling components and tubing within a PC. Quantum Torque series products cover angled adapters, rotary and static extenders, splitters, G1/4" plugs, drain valves, fittings, and much more. Technical specifications Threading: G1/4" Thread length: 4.5mm Diameter: 23mm Installed height: 28mm ROHS compliant!PLEASE NOTE This product should NOT be installed with any aluminum Fluid Gaming parts!. EK WaterBlocks EK Water Blocks EK-Quantum Torque Splitter 3F T in Black - shop the best deal online on appliances4.me

Category: Appliances and accessories

Delivery cost: GB::Royal Mail Tracked:1.99 GBP

MPN: 3831109826683

GTIN: 3831109826683

Description: EK-Quantum Torque Extender Rotary MM 14 is a premium revolvable male-threaded extender interconnect with male threads on both ends. It is used for connecting two water cooling components which both have female G1/4 threads. Made from nickel-plated CNC machined brass. Sealed with quality EPDM O-rings. EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The Torque family of fittings offers a secure and modular system of connections between liquid cooling components and tubing within a PC. Quantum Torque series products cover angled adapters, rotary and static extenders, splitters, G1/4" plugs, drain valves, fittings, and much more. These static extenders can be either tightened by hand or by using EK-Loop Multi Allen Key /Allen Key 9mm (not included, available for separate purchase). Technical data: Threading: 2 x G1/4" (Male-Male) Thread length: 4.5mm Material: Brass Finish: Nickel Diameter: 23mm Height: 14mm Made in Europe PLEASE NOTE: Do not use excessive force when attaching fitting barbs using Allen Key 9mm in order to prevent damage! This product should NOT be installed with any aluminum Fluid Gaming parts!. EK WaterBlocks EK Water Blocks EK-Quantum Torque Extender Rotary MM 14 in Nickel - shop the best deal online on appliances4.me

Category: Appliances and accessories

Delivery cost: GB::Royal Mail Tracked 24:3.95 GBP

MPN: 3831109828021

GTIN: 3831109828021

Description: EK-Quantum Torque (Adapter Fitting) - Black is a revolvable T adapter fitting with G1/4" threads. In the form of a cut-off cylinder, it is very sturdy and there are zero movements in the revolvable joint. With one male and two female threads, it can be used for setting up drain ports, 90-degree angles or parallel connection between components. This Quantum Line adapter is made out of CNC machined brass with high-quality Satin Black finish while the seal is made by quality rubber O-rings. Black EK-Quantum Torque series fittings are intentionally not painted on the inside to reduce the level of possible pollutants in the loop. It is an extremely secure and sturdy piece that will last for many future builds. The adapter allows for connection of fitting with G1/4" threads to extend tubing possibilities in your water cooled system allowing for easier bends and better accessibility. EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The Torque family of fittings offers a secure and modular system of connections between liquid cooling components and tubing within a PC. Quantum Torque series products cover angled adapters, rotary and static extenders, splitters, G1/4" plugs, drain valves, fittings, and much more. Technical specifications: Material: made of nickel plated brass Threads: G1/4" BSP; 4,5mm male thread length G1/4" BSP, 6mm female thread length The outer diameter: 23mm Installed height: 28mm Sealed with high-quality NBR o-ring. ROHS compliant!. EK WaterBlocks EK Water Blocks EK-Quantum Torque Rotary T in Black - shop the best deal online on appliances4.me

Category: Appliances and accessories

Delivery cost: GB::Royal Mail Tracked 24:3.95 GBP

MPN: 3831109814499

GTIN: 3831109814499

Description: EK-Quantum Torque Splitter 3F T - Nickel is a simple cylinder-shaped adapter fitting with 3 (three) G1/4" Female threads. This product is useful for splitting or combining the liquid flow in your loop. Made from CNC machined nickel-plated brass. EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The Torque family of fittings offers a secure and modular system of connections between liquid cooling components and tubing within a PC. Quantum Torque series products cover angled adapters, rotary and static extenders, splitters, G1/4" plugs, drain valves, fittings, and much more. Technical specifications: Threading: G1/4" Thread length: 4.5mm Diameter: 23mm Installed height: 28mm ROHS compliant!PLEASE NOTE: This product should NOT be installed with any aluminum Fluid Gaming parts!. EK WaterBlocks EK Water Blocks EK-Quantum Torque Splitter 3F T in Nickel - shop the best deal online on appliances4.me

Category: Appliances and accessories

Delivery cost: GB::Royal Mail Tracked 24:3.95 GBP

MPN: 3831109826669

GTIN: 3831109826669

Description: EK-Quantum Torque Rotary (Adapter Fitting) is a revolvable T adapter fitting with G1/4" threads. In the form of a cut-off cylinder, it is very sturdy and there are zero movements in the revolvable joint. With one male and two female threads, it can be used for setting up drain ports, 90-degree angles, or parallel connections between components. This Quantum Line adapter is made out of CNC-machined brass and features a high-quality nickel plating followed by a second plating of real gold! The seal is made with quality EPDM O-rings. It is an extremely secure and sturdy piece that will last for many future builds. The adapter allows for connection of fitting with G1/4" threads to extend tubing possibilities in your water-cooled system allowing for easier bends and better accessibility. EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The Torque family of fittings offers a secure and modular system of connections between liquid cooling components and tubing within a PC. Quantum Torque series products cover angled adapters, rotary and static extenders, splitters, G1/4" plugs, drain valves, fittings, and much more. Technical specifications: Material: Brass Finish: Gold Threads: G1/4" BSP; 4,5mm male thread length G1/4" BSP; 6mm female thread length The outer diameter: 23mm Installed height: 28mm Sealed with high-quality NBR o-ring PLEASE NOTE: This product should NOT be installed with any aluminum Fluid Gaming parts!. EK WaterBlocks EK Water Blocks EK-Quantum Torque Rotary T in Gold - shop the best deal online on appliances4.me

Category: Appliances and accessories

Delivery cost: GB::Royal Mail Tracked:1.99 GBP

MPN: 3831109849835

GTIN: 3831109849835

Description: EK-Quantum Torque Plug - Black is a premium Quantum G1/4" plug for closing the unused ports on your water cooling equipment. EK recommends tightening the plug by hand. Made from CNC machined brass with a high-quality satin black finish. Sealed with quality rubber O-ring. EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The Torque family of fittings offers a secure and modular system of connections between liquid cooling components and tubing within a PC. Quantum Torque series products cover angled adapters, rotary and static extenders, splitters, G1/4" plugs, drain valves, fittings, and much more. Technical data Threading: G 1/4" Thread length: 4.5mm Diameter: 23mm Installed height: 5.5mm ROHS compliant!PLEASE NOTE This product should NOT be installed with any aluminum Fluid Gaming parts!. EK WaterBlocks EK Water Blocks EK-Quantum Torque Plug in Black - shop the best deal online on appliances4.me

Category: Appliances and accessories

Delivery cost: GB::Royal Mail Tracked:1.99 GBP

MPN: 3831109826331

GTIN: 3831109826331

Description: EK-Quantum Torque (Adapter Fitting) - Black is a revolvable angled (90°) adapter fitting with G1/4" threads. In the form of a cylinder, it is very sturdy and there are zero movements in the revolvable joint. This Quantum Line adapter is made out of CNC machined brass with high-quality Satin Black finish while the seal is made by quality rubber O-rings. Black EK-Quantum Torque series fittings are intentionally not painted on the inside to reduce the level of possible pollutants in the loop. It is an extremely secure and sturdy piece that will last for many future builds. The adapter allows for connection of fitting with G1/4" threads to extend tubing possibilities in your water cooled system allowing for easier bends and better accessibility. Technical specifications: Material: made of nickel plated brass Threads: G1/4" BSP; 4,5mm male thread length G1/4" BSP, 6mm female thread length The outer diameter: 23mm Installed height: 31,5mm Sealed with high-quality NBR o-ring. EK WaterBlocks EKWB EK-Quantum Torque Rotary 90 Degree Fitting in Black - shop the best deal online on appliances4.me

Category: Appliances and accessories

Delivery cost: GB::Royal Mail Tracked:1.99 GBP

MPN: 3831109814475

GTIN: 3831109814475